Gravel delivery in South Patrick Shores, FL

Hello Gravel requires a 3-ton minimum order. Prices vary by gravel type and local supplier, but expect material costs roughly in the range of $35 to $75 per ton for common gravels in the Florida coast area; some orders include free delivery while others add a delivery fee (often $0 to $100) depending on distance, truck access, and supplier. For an exact price, check your zip code on our site or request a quote.

For driveways on sandy coastal soils we recommend angular crushed stone such as 3/4u0022 crushed stone or #57 crushed stone because it compacts and locks together better than round rock. Pea gravel can be attractive for patios and low-traffic areas but tends to shift on sand and with traffic, while crushed stone provides better stability and drainage near the coast. If you want a local look, coquina or shells are available regionally but they wear and shift more quickly than crushed rock for vehicle traffic.

For a 12x30 ft driveway (360 sq ft): 4u0022 compacted depth is about 4.4 cubic yards (approx. 6.2 tons) and 6u0022 is about 6.7 cubic yards (approx. 9.3 tons). For a 20x20 ft area (400 sq ft): 4u0022 depth is about 4.9 cubic yards (approx. 6.9 tons) and 6u0022 is about 7.4 cubic yards (approx. 10.4 tons). In coastal South Patrick Shores, aim for 4u0022 to 6u0022 of compacted gravel for driveways, with thicker sections where drainage or vehicle turning increases wear.

Use larger, free-draining material for stormwater management: 1-1 1/2u0022 riprap or 1/2u0022 to 1u0022 crushed stone work well for high-flow areas and swales. #57 crushed stone (about 3/4u0022) and clean drain rock are good for standard yard drainage trenches and French drains because they let water pass while resisting compaction. Avoid fine screenings in runoff-prone spots since they can clog and reduce permeability during heavy tropical rains.

Gravel driveways in South Patrick Shores can last many years but will require regular maintenance due to salt air and intense summer rains; expect to regrade and add material every 1 to 3 years depending on traffic and storm exposure. After heavy storms you may need to refill low spots and recompact; annual inspection and minor top-ups (1/2u0022 to 1u0022) are common. Use a stable base and proper edge restraint to reduce material loss from washout.

Locally sourced coquina or shell can be cheaper and gives a coastal look, but shells tend to crush and move under vehicle traffic and may require more frequent replenishment than crushed gravel. Pavers are the most durable and low-maintenance option but are significantly more expensive to install. Crushed gravel (e.g., #57 or 3/4u0022) is a middle ground: cost-effective, locally available, and suitable for driveways when properly installed and compacted.

Yes—on sandy coastal soils we recommend installing a geotextile fabric and a compacted base layer (4u0022 of crushed stone or compacted aggregate) before topdressing with gravel to reduce mixing with native sand and minimize washout. Fabric helps keep the base and top layers separate and reduces weed growth, though it does not eliminate the need for edge restraints and proper drainage. For areas prone to heavy runoff, a deeper, well-compacted base and good grading are especially important.

Deliveries are made by dump truck (typically tri-axle), so you need adequate turning room, driveway width, and vertical clearance for safe drop-off; narrow streets, low-hanging tree limbs, gates, or steep driveways can limit access. Some local streets or HOAs may have weight or permit restrictions for heavy trucks—note any access issues in your order notes and our dispatch team will confirm before scheduling. Drivers may offer tailgate spreading at their discretion, but spreading is not guaranteed.

Installed costs vary by site conditions, material choice, and labor rates, but a typical installed compacted gravel driveway in the area often ranges from about $2.50 to $6.50 per square foot. For a 12x30 ft driveway (360 sq ft) that equates to roughly $900 to $2,340 installed, depending on base work, edging, and access. For accurate pricing, request quotes that list material, base preparation, compaction, and any drainage work separately.

Requirements vary: many homeowners do not need a county permit for residential gravel driveways, but local Brevard County codes and your specific HOA may have rules about driveway materials, setbacks, and impervious surface calculations. Some HOAs prohibit loose gravel for front yards or require a particular appearance. Check with Brevard County planning and your HOA before ordering to avoid potential compliance issues.

Select a gravel type suited to the use (crushed stone for driveways, pea gravel for decorative areas, larger rock for drainage) and include project dimensions and desired compacted depth when ordering. Tell us about access issues, gates, or special delivery instructions in the Order Notes; we recommend checking your zip code for localized pricing and next-day cutoff times. If you need help calculating quantities, use Hello Gravel’s material calculator or contact our team for guidance.