Fill Dirt delivery in Lakeside, FL

Generally yes: raw fill dirt usually costs less per cubic yard than decorative gravel or crushed stone. However, price depends on delivery distance, moisture content, and whether you need screened/structural fill. For driveways and surfaces you should plan to use gravel or crushed stone on top of compacted fill dirt, which affects total project cost.

In the Florida region, delivered fill dirt most commonly falls in a broad range because suppliers, distance, and material quality vary; expect roughly $12 to $35 per cubic yard delivered as a ballpark. Heavier, screened, or structural fill can cost more, and very local short-haul deliveries can be cheaper. For an exact price for your Lakeside address, request a quote through Hello Gravel.

Hello Gravel typically arranges tri-axle dump trucks that carry about 10 to 12 cubic yards loose; single-axle trucks hold roughly 6 to 8 yards. One cubic yard covers 324 square feet at 1 inch depth (27 cu ft / (1/12 ft) = 324 sq ft), so at 4 inches depth one yard covers about 81 sq ft. Use those figures to estimate coverage and ask your quote rep if you need exact truck size for your delivery.

Multiply the per-yard price by the truck capacity and add any delivery fee; for example a 10-yard truck at $20/yd would be about $200 plus delivery. Typical delivered loads in the Florida region often range from about $150 to $700 depending on yards, distance, and material type. Request a Hello Gravel estimate for a firm price and available truck size.

Fill dirt is good for building up grade and filling low spots but is not a suitable wearing surface for driveways because it can rut and hold water. For a driveway, compacted structural fill or engineered fill for the subgrade plus 4 to 6 inches of crushed stone or ¾"-1" angular base rock on top is recommended. When ordering, ask for compactable or structural fill and plan to add crushed stone as the wearing surface.

Ask suppliers for 'structural fill' or 'compactable fill' and specify you need it for a base under pavement or concrete. You will usually follow that with a layer of crushed stone (base course) and compaction equipment; include geotextile fabric if your site is wet or has poor soils. Hello Gravel can quote the required yardage and local suppliers can coordinate with contractors if you need compaction and grading.

People sometimes call a compacted mix of fines and gravel 'poor man’s concrete' because it creates a hard surface without cement, but plain fill dirt alone is not that material. If you want a stabilized surface, ask local contractors about crusher-run, reinforced base mixes, or soil-lime/cement stabilization; Hello Gravel can deliver aggregates like crusher-run or sand but cement stabilization is usually a job for a contractor. Contact our team for quotes on the aggregate materials used in these mixes.

Many local suppliers and contractors in the Florida region offer grading and compaction as separate services; Hello Gravel coordinates material delivery but grading/compaction is usually arranged with local contractors. Small grading and compaction jobs commonly run from a few hundred dollars to $1,500 or more depending on access, scope, and equipment needed. You can request tailgate spreading at checkout, but drivers perform that only at their discretion and complex grading will require a hired contractor.

Yes, most suppliers will offer volume pricing for larger orders, and Hello Gravel provides commercial pricing options for bulk purchases. Orders of 10 yards or more typically qualify for lower per-yard rates or negotiated haul pricing, depending on supplier capacity and distance. Reach out to our sales team to get a volume quote for your Lakeside project.

Hello Gravel’s minimum order is 3 tons, and standard delivery lead time is 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Delivery fees in the Lakeside area vary by distance, site access, and load size; many deliveries are free locally while others can incur fees anywhere from a modest amount to over $100. If you need spreading or special placement, request it at checkout and our team will note it for the driver, keeping in mind the driver may decline on-site if unsafe.

Measure the area in square feet and decide the desired depth in inches, then use this formula: (square feet x depth in inches) / 324 = cubic yards needed. For example, a 20' x 30' area (600 sq ft) at 6 inches needs about (600 x 6) / 324 = 11.1 cubic yards, so round up and add 5 to 10% for settling and compaction. If you prefer, use Hello Gravel’s material calculator or contact our team for help with the estimate.